Home – Nippon Steel https://nipponsteelcompany.com company Tue, 26 Jan 2021 13:22:36 +0000 en-US hourly 1 https://wordpress.org/?v=5.7 https://nipponsteelcompany.com/wp-content/uploads/2021/01/cropped-g58-1-32x32.png Home – Nippon Steel https://nipponsteelcompany.com 32 32 5tons Front Wheel Loader (ZL50G) https://nipponsteelcompany.com/product/162/ https://nipponsteelcompany.com/product/162/#respond Mon, 25 Jan 2021 17:31:24 +0000 https://nipponsteelcompany.com/?post_type=product&p=162
Description Specification unit
Rated load 5000kgs or 11000lbs kg
Raising time 6 s
Total cycling time 11 s
Max. traction force 145 kN
Articulation angle 35 °
Min. turning radius 6400 mm
Grade-ability 28 °
Wheel base 3300 mm
Track 2200 mm
Speed
  1st(F/R) 11.5/16.5 km/h
  2nd(F/R) 37 km/h
Engine model SC11CB220G
Rated power/rated speed 162KW/2200r/min(220HP/2200r/min)
Tires 23.5-25
Working Equipment part
Clamp Min. clamping diameter 450/800 mm
Dump clearance 3230 mm
Dump reach 1845 mm
Overall dimension (LxWxH) 8414×2800×3460 mm
Operating weight 18 t
Side dump Bucket capacity 2.3 m 3
Dump clearance(Downward/side) 3025/3957 mm
Dump reach(Downward) 1192 mm
Max. breakout force 172 kN
Overall dimension (LxWxH) 8227×3000×3460 mm
Operating weight 19.2 t
Bucket Bucket capacity ( standard ) 3.0 m3or 3.9 cubic yards m 3
Dump clearance (Downward/side) 3090 mm
Dump reach (downward) 1130 mm
Max. breakout 170 kN
Overall dimension (LxWxH) 8110×3000×3460 mm
Operating weight 18 t
]]> Main Specification for ZL50G Wheel loader (5 Ton Wheel Loader with CE, CAT licensed Engine)

Engine
Engine model: CAT licensed C6121 engine
Rated power: 162kW@2200rpm

Working Performance
Rated loading: 5000kgs
Max. Dump clearance: 3022mm
Max. Dump reach: 1162mm
Rated bucket capacity: 3 cubic meter
Breakout force: 180kN
Min. Turning radius: 6200mm
Overall dimension: 8050X2985X3520mm
Grass Weight: 17.5Ton

ZL50G Main Feature:
Engine:
Shanghai Diesel Engine C6121 turbocharged diesel engine, produced under CAT3306 certification, is powerful, efficient and reliable. It boasts large torque backup, low fuel consumption and noise, and reliable performance. The ignition system ensures the engine can only be started when the transmission is in neutral.

Axles
The composed drive axles with wet-type brakes feature greater loading force, longer service life, and superior reliability, ensuring its suitability to various tough conditions.

Loader Chinese supplier, CE loader, wheel Loader, mini loader, skid steer loader, loader Zl50G

We supply Zl50G wheel loader, loader with CE, skid steer loader, mini loader, if you need more information about our loader products, please feel free to contact with kudat.

]]> https://nipponsteelcompany.com/product/162/feed/ 0 Drill Chuck https://nipponsteelcompany.com/product/drill-chuck/ https://nipponsteelcompany.com/product/drill-chuck/#respond Sat, 16 Jan 2021 18:36:07 +0000 https://nipponsteelcompany.com/?post_type=product&p=140 Drill Chuck Read More »

]]> Product Performance: Three stands of the product are made by high quality material of chrome steel. The product itself, appearance, nut and pull wheel is precisely made by the high quality steet. With then advanced technology of whole quenching process, the backward of thrn chuck is processed with high accuracy. The product is very strong, resistant and precise with the function of holding capacity, strong whack-resistance and high accuracy. At the same time, the design of the product appearance is very beautiful.
Application Range: Specially applied in process of heavy_duty tasks, also can be used in industries at high frequency. Often used in drilling tools such as lathe, milling machine, grinding machine and wood machinery. Help you raise the working effiency and reduce the wastage of knife tools.
Accuracy Inspection: The maximum radial skip is less than 0.15mm tested by two rods, which id better than Level A accordingto the mational standard, The product with radial skip less than 0.06mm can be producted by the company.
Technical Specifications: The hardness of drill chuck can reach HRC47-50. The hardness of drill chuck claw, nut can reach HRC48-50. The rear taper is painted for the inspection with drill clamp cone gauge(GB-11855). The contact ratio is over 90%, much higher than the standard of 70%. Torque: With input 50N. M and output 30N. M, the product is better than of national standard of 24N. M input and 14N. M output.

]]> https://nipponsteelcompany.com/product/drill-chuck/feed/ 0 3-Jaw Mounting Lathe Chuck https://nipponsteelcompany.com/product/3-jaw-mounting-lathe-chuck/ https://nipponsteelcompany.com/product/3-jaw-mounting-lathe-chuck/#respond Sat, 16 Jan 2021 18:22:55 +0000 https://nipponsteelcompany.com/?post_type=product&p=135
  • Model NO.: K11 1250A
  • Size: Large
  • Type: Plain Back Mounting Lathe Chuck
  • Certification: ISO 9001:2000, CE
  • Through Hole: 500mm
  • Bolt: M24
  • Trademark: YUANPAI
  • Specification: ISO Standard, Russian Standard
  • HS Code: 84662000
  • Logo Printing: with Logo Printing
    • Customized: Customized
    • Material: Steel
    • Description: 3-Jaw Plain Back Mounting Lathe Chuck (K11 1250A)
    • Clamping Range: 6-1250mm
    • Oil Hole or Not: 2 Oil Holes on The Chuck Body
    • Transport Package: Pylwood Case
    • Origin: China
    ]]>     Hardened and ground working surfaces prolong life while ensuring sustained accuracy and repeatability.
    Balanced scroll plate allows higher rotation speeds without excess vibration.
    Mounted on the machine tool spindle from the back of the chuck by using an adapter plate.
    YUANPAI continues to manufacture our famous high quality Standard and Precision Lathe Chucks for customers with demanding applications around the world.
    Accessory: safety wrench,stud bolt,pinion,soft 2-piece jaws,hard 2-piece reversible jaws,soft top jaws,hard top jaws,soft solid jaws,hard inside solid jaws, hard outside solid jaws,hard master jaws,scroll plate,adapter for lathe chuck.

    ]]>     https://nipponsteelcompany.com/product/3-jaw-mounting-lathe-chuck/feed/ 0     Makita Hammer Drill https://nipponsteelcompany.com/product/makita-hammer-drill/ https://nipponsteelcompany.com/product/makita-hammer-drill/#respond Sat, 16 Jan 2021 18:10:10 +0000 https://nipponsteelcompany.com/?post_type=product&p=131 Makita Hammer Drill Read More »

    ]]>     Powerful 6.6 AMP motor for the most demanding applications Conveniently-located 2-mode switch allows for fast mode changes between “Rotation Only” and “Hammering with Rotation” Variable 2-speed (0-1,200 & 0-2,900 RPM) with variable speed control dial Built-in clutch engineered to reduce gear damage by automatically disengaging gears if bit binds Positive stop mode selector prevents accidental mode disengagement Large trigger switch and 360° swivel side handle for added comfort Recessed lock-on button for continuous use All-ball bearing construction for longer tool life Ergonomic rubberized grip for increased comfort on the job Lightweight (5.6 lbs.) for reduced operator fatigue Designed for low noise and reduced vibration

    ]]>     https://nipponsteelcompany.com/product/makita-hammer-drill/feed/ 0